![]() ![]() As the surface was a flat cement surface this meant that the rubber was very old or had been exposed to some condition to make it brittle. These tips would not have to be extended unless the surface was very uneven or rocky.įirst Issue I noted was that the rubber tips broke up and fell apart on the first evening of use. The bottom of the tripod legs have extendable rubber protected tips to assist reduce vibration and help reduce slippage/movement on uneven surfaces. The outer 3 holes appear to be used for options like the Pier Adapter. The level adjustment screws have one threaded side and one plane rounded off side separated by a plastic knob. 3 of these (inner holes) are used for the Level Adjustment Screws which is Ioptron’s unique way to support and help level the mount (even if the tripod is not level). The top of the tripod has 6 threaded holes. The plastic tripod support bracket is relatively small and has 3 indentations (one for each leg) which helps locate and lock the legs just under the base of the tripod top. There is no tray or spreader arms to assist with stability although there is a heavy plastic tripod support bracket to helps with that which gets screwed down after the mount is screwed onto the top of the tripod. Lock down seems to be rock solid as I tested the movement of the legs against heavy load and they did not budge. The legs on the tripod are extendable and have a simple locking lever which is easy to operate. The Ioptron Pro Tripod is the heavier 2inch version and I would suggest based on current experience with this tripod is that this would be the minimum size that should be purchased to give reasonable stability. So you have everything to connect and get the mount up and running in one tidy case. ![]() However the Mount is sent in a custom lined silver case and appears to be well packed, protected and easy to transport.Īlso supplied in the mount case is the Hand Controller, Hand Controller Cable, 240 to 12v Power Pack, USB Cable, a 12v Cable with a Lighter Socket Plug, Tripod Level Adjustment screws, spare Vixen and Losmandy Saddles, and a counterweight. Unlike Takahashi who lines each box with foam the Ioptron is just double cardboard boxes and the only packing foam is in the inner box for the tripod. The mount and tripod come in 2 separate double cardboard boxes. The Ioptron seemed to be the only ideal fit available in a Alt/Az mount to meet all the specifications. I also decided that it would be good for him to learn on an Alt/Az mount then move into a GEM after he had much more practical experience. Ability to Plug into Laptop or Iphone/Ipad Ease of Use with GOTO and Tracking & GPS Handle TSA120 Payload with Extra Capacity Allowance Having Purchased a Takahashi TSA120 for my Son and Family as a Grab and Go Refractor, I decided to purchase a Ioptron Minitower Pro (MTPRO). I decided to split this thread from my TSA thread as the Ioptron Mount does need to be covered in independent discussion. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |